Vecoplan VAZ

22 products

Knife holder rotor 115x87x64.5, for 60° cutting disc, corners chamfered, 1x through hole Ø19, 1x threaded hole M12, Armored

Knife Holder

Knife holder rotor 115x87x64.5, for 60° cutting disc, corners chamfered, 1x through hole Ø19, 1x threaded hole M12, Armored

Perforated plate length 820, plate thickness t=10, perforation Ø40, 8x boreholes Ø17, 3 ribs and 2 strips welded on

Perforated sheets

Perforated plate length 820, plate thickness t=10, perforation Ø40, 8x boreholes Ø17, 3 ribs and 2 strips welded on

Perforated sheet metal 4-piece set, Ø90 perforation, strips welded on longitudinally, with square mounting holes

Perforated sheets

Perforated sheet metal 4-piece set, Ø90 perforation, strips welded on longitudinally, with square mounting holes

Perforated sheet metal 4-piece set, Ø120 perforation, longitudinally welded strips, with square mounting holes

Perforated sheets

Perforated sheet metal 4-piece set, Ø120 perforation, longitudinally welded strips, with square mounting holes

Perforated sheet metal 4-piece set, Ø30 perforation, strips welded on the longitudinal side, with square mounting holes

Perforated sheets

Perforated sheet metal 4-piece set, Ø30 perforation, strips welded on the longitudinal side, with square mounting holes

Perforated plate, length 1582, plate thickness t=8, perforation Ø30, 5 ribs, 2 strips

Perforated sheets

Perforated plate, length 1582, plate thickness t=8, perforation Ø30, 5 ribs, 2 strips

Perforated sheet metal 4-piece set, Ø80 perforation, longitudinally welded strips, with square mounting holes

Perforated sheets

Perforated sheet metal 4-piece set, Ø80 perforation, longitudinally welded strips, with square mounting holes

Perforated sheet metal 4-piece set, Ø60 perforation, longitudinally welded strips, with square mounting holes

Perforated sheets

Perforated sheet metal 4-piece set, Ø60 perforation, longitudinally welded strips, with square mounting holes

Perforated sheet metal 4-piece set, Ø100 perforation, strips welded along the length, with square mounting holes

Perforated sheets

Perforated sheet metal 4-piece set, Ø100 perforation, strips welded along the length, with square mounting holes

Perforated plate, length 1582, sheet thickness t=8, perforation Ø60, 5 ribs, 2 strips

Perforated sheets

Perforated plate, length 1582, sheet thickness t=8, perforation Ø60, 5 ribs, 2 strips

Screen plate length 1582, plate thickness t=8, perforation Ø25, 5 ribs, 2 strips

Perforated sheets

Screen plate length 1582, plate thickness t=8, perforation Ø25, 5 ribs, 2 strips

Cutting crown 80x80x45, 1x M24 thread in the center, 2 corners flattened

Cutting Crowns

Cutting crown 80x80x45, 1x M24 thread in the center, 2 corners flattened

Cutting Crown 60x60x30, deep gullet, 1x M20 thread in the center, conically reinforced threaded section

Cutting Crowns

Cutting Crown 60x60x30, deep gullet, 1x M20 thread in the center, conically reinforced threaded section

Cutting crown 40x40x20, 1x M12 thread centered, 4 corners carbide-tipped

Cutting Crowns

Cutting crown 40x40x20, 1x M12 thread centered, 4 corners carbide-tipped

Cutting Crown 60x60x30, slight hollow grind, flattened, 2 opposite corners with web, 1x M18 thread in center

Cutting Crowns

Cutting Crown 60x60x30, slight hollow grind, flattened, 2 opposite corners with web, 1x M18 thread in center

Counter Knife Support 5-piece set, for 60mm cutting crown, 1993x127x23/43, L-shaped

Knife Holder

Counter Knife Support 5-piece set, for 60mm cutting crown, 1993x127x23/43, L-shaped

Counter Knife 257x108x28, 4 tooth notches, tooth pitch 64, 3x stepped bore 38x32/24x18, 2x thread M12

Counter Knives + Scrapers

Counter Knife 257x108x28, 4 tooth notches, tooth pitch 64, 3x stepped bore 38x32/24x18, 2x thread M12

Counter Knife 257x96x27, 6 teeth on both sides, tooth pitch 43, 3x stepped bore 38x32/24x18, 2x stepped thread M12/Ø16

Counter Knives + Scrapers

Counter Knife 257x96x27, 6 teeth on both sides, tooth pitch 43, 3x stepped bore 38x32/24x18, 2x stepped thread M12/Ø16

Cutting Crown 60x60x30, deep concave, 1x M20 thread centered, cylindrically reinforced thread area

Cutting Crowns

Cutting Crown 60x60x30, deep concave, 1x M20 thread centered, cylindrically reinforced thread area

Cutting Crown 80x80x45, slight concave, 1x M24 thread centered

Cutting Crowns

Cutting Crown 80x80x45, slight concave, 1x M24 thread centered

Service hours

Mon - Thu: 08:00 - 16:30
Friday: 08:00 - 14:00

Call us

+49 2825 222 98 07

Write us

sales@recyclingparts.de

Address

MSV GmbH
Uedemer Str. 22
47627 Kevelaer